, ,

Гелькоут Formenharz P

Availability:

Out of stock. Will be delivered within 14 days.


матричний
епоксидний
чорного кольору

30.0  / кг

Out of stock. Will be delivered within 14 days.

Product Price

Гелькоут для виготовлення форм, заміна F 200 !!!
Епоксидний гелькоут чорного кольору. Тиксотропний.
Застосовується в якості поверхневого шару при створенні матричних конструкцій.
Відрізняється від звичайної епоксидної смоли підвищеними характеристиками міцності і поліруючими властивостями.
Гелькоут жорстко-пружний, не крихкий.
Приблизна витрата – 0,5-1 кг / м²
Товщина шару, що наноситься 0,5-1 мм
Затвердіння: 24 години при кімнатній температурі.
Виробник: Poxy-Systems, Німеччина

  • Hard elastic, good edge strength
  • Excellent grinding and polishing properties
  • Thixotropic (non-drip)
  • Manufactured in vacuum, so optimally free of air bubbles and homogeneous

This two-component epoxy resin is coloured black for gelcoats (applied thickness 0.5–1 mm) in mould construction with high edge strength and good polishing properties. Mould resin P is processed and cured at room temperature, in combination with Hardener EPH 161-P a post-curing (with the laminate backing) approx. 15 hours at at least 40 °C follows. It can be used as a top layer in conjunction with epoxy resin laminates and laminating ceramics. In contrast to resin and metal systems, the surfaces are polishable. This tooling gelcoat is hard-elastic, i.e. not brittle, and exhibits good edge strength.

Consumption: approx. 0.5–1 kg/m²
Hardener P: 30 minutes processing time yielding surfaces resistant to styrene
Hardener EPH 161-P: 90 minutes processing time for enhanced heat distortion properties, surfaces not resistant to styrene

You may also like…

Select your currency
EUR Euro